Randstad In-House Services, a temporary staffing service, has 72 manufacturing positions available for immediate placement in Canton, Georgia. Randstad, will be accepting applications in person on Thursday, October 29, 2009, from 9AM to 4PM at its on-site location:

Randstad In-House Services

140 Etowah Industrial Ct.

Canton, GA 30114

enid.merck@us.randstad.com

Available positions include:

Inspector/Assembler $7.25/hr

Machine Operator $9.00/hr

Packer $8.00/hr

Candidates must have the ability to work as a team player, have a hard-working/self-starter approach, have reliable method of transportation, and maintain a good attendance record.

Basic math and writing skills are required. Mechanical skills are also needed as positions require the use of small hand tools. Candidate must be able to read, write, speak and understand English. High School diploma or GED a plus.

Drug testing and background checks are required of all applicants.

Position: INSPECTOR/ASSEMBLER

Shifts: 1st Shift 7AM – 7PM, 2nd Shift 7PM – 7AM

Pay: $7.25/hour

Location: Canton, GA

Responsibilities include, but are not limited to, assembly and visual inspections of automotive parts at close range and comparison to samples. Must be able to lift 50 pounds on daily basis, as well as bend continuously. Required to wear steel-toe shoes and goggles. Capable of understanding work instructions and following procedures. Multi-tasking skills and time management are a must.

Positions are physically challenging; working and walking on your feet during a 12 hour shift. Only those candidates who meet WorkKeys requirements will be considered.

Position: INJECTION MACHINE OPERATOR

Shifts: 1st Shift 7AM – 7PM, 2nd Shift 7PM – 7AM

Pay: $9.00/hour

Location: Canton, GA

Responsibilities include, but are not limited to, visual inspections of automotive parts at close range and comparison to samples. Must be able to lift 50 pounds on daily basis, as well as bend continuously. Required to wear steel-toe shoes and goggles. Capable of understanding work instructions and following procedures. Multi-tasking skills and time management are a must.

Positions are physically challenging; working and walking on your feet during a 12 hour shift. Only those candidates who meet WorkKeys requirements will be considered.

Position: PACKER

Shifts: 1st Shift 7AM – 7PM, 2nd Shift 7PM – 7AM

Pay: $8.00/hour

Location: Canton, GA

Responsibilities include, but are not limited to, visual inspections of automotive parts at close range and comparison to samples. Must be able to lift 50 pounds on daily basis, as well as bend continuously. Required to wear steel-toe shoes and goggles. Capable of understanding work instructions and following procedures. Multi-tasking skills and time management are a must.

Positions are physically challenging; working and walking on your feet during a 12 hour shift. Only those candidates who meet WorkKeys requirements will be considered.

Randstad, will be accepting applications in person on Thursday, October 29, 2009, from 9AM to 4PM at its on-site location:

Randstad In-House Services

140 Etowah Industrial Ct.

Canton, GA 30114

enid.merck@us.randstad.com

Read more here:
Immediate Openings for Industrial Positions (Canton, GA)

Growing manual transfer jobshop seeks an anodize/plating/mtce. supervisor. Primary processes include anodize (type II and III), alkaline zinc and electroless nickel. Duties include, but are not limited to, supervising line employees, scheduling work, bath analysis, troubleshooting, waste treatment, shop and equipment mtce., and customer service.

Candidate MUST have a minimum of 3 years HANDS ON experience with at least two of the following: Anodize, Zinc Plating, Electroless Nickel Plating

Read more here:
Anodize/Plating/Mtce. Supervisor (Lilburn, Ga)

Read more from the original source:
Part-time Shop Labor (Norcross)

Read more here:
Shipping and Production position (Alpharetta )

With our growth, the successful candidate can expect responsibilities and compensation to grow.

Responsibilities include:

- coordination and execution of daily small parcel Receiving.

- coordination and execution of daily small parcel Shipping.

- organization and execution of inventory storage, locating and put-away.

- coordination and execution of daily pull/ship orders.

- maintain physical inventory and general housekeeping.

- provide recommendations to policy / procedure to improve effectiveness and efficiency.

Qualifications include:

- 3-5 years in warehousing / distribution, preferably in lead / supervisory role.

- Must be able to lift 50lb boxes.

- High School graduate or GED.

- Military logistics experience a plus.

Read more from the original source:
Warehouse Lead (Norcross, GA)

Perfect position for someone who has at least 3 years experience in purchasing/inventory and some logistics and looking to grow with a company. Also a good fit for someone who has years of experience in purchasing and has found retirement boring. This company is growing and busting at the seams with sales. So if you can come in at this salary you will be rewarded as business continues to grow.

Inventory including raw goods and finished goods. Purchasing and shopping freight pricing – understands “bill of materials” all systems are in place and you will have an on-site employee that has been handling it all. This company uses MAS 200.

Please send your resume highlighting the background that makes you the best candidate for this job. Since one person is doing two jobs – they are ready for someone to start ASAP!

Email resume to csmith478@bellsouth.net. Immediate opening. $35,000 to start plus growth potential! Qualified candidates only please.

Read more here:
Purchasing and inventory for manufacturing company (Atlanta Fulton Industrial)

Hours of Operation:

7:00AM-4:30PM Monday-Friday (MUST be available to work some overtime)

This is a Temporary to Hire Opportunity and you should be prepared to start during the week of October 26.

Mandatory Requirements:

***Certified on Sit-Down Forklift

***Experienced in unloading trucks SAFELY, quickly and accurately

***Experienced with Receiving and Inventory Control

***Experienced with Bills of Lading

***Experienced with reading and signing receivers

***Experienced with Domestic Shipping

This position requires the ability to quickly adapt to the processes and procedures to match whatever our client asks for. Also, this individual needs to be proactive and have the ambition and motivation to work hard and to be a self-starter with SAFETY in mind at all times.

All candidates should be prepared to demonstrate their forklift driving ability on the day of interview with our client.

If you meet the requirements for this position, please email your resume in MS Word format as soon as possible. We will review your resume and if you have the skills and experience listed above, we will contact you for an initial interview.

***

Read more here:
Forklift Driver/Receiver (Lawrenceville)

This person will be a “jack of all trades” and will assist the warehouse and production staff by performing different tasks. Ideally, this person will have experience in a packing/assembling environment and won’t mind doing a little of everything..

RESPONSIBILITIES:

• Assist with support operation of a fully-automated packaging line

• Assist with feeding the machine with bulk product, boxes, cases and other materials

• Apply labels by hand to finished boxes

• Assist with cleaning of equipment and production facilities

• Maintain a clean commons and production areas

• Run general errands

REQUIREMENTS:

• High school education or equivalent

• Ability to lift 40+ lbs

• Experience working in a warehouse or production environment

• Ability to work standing for extended periods of time

• Forklift experience a big plus

• Applicants must be of legal age

• Must be able to provide proof of U.S.A. employment eligibility

WE OFFER:

This position pays $8.00 an hour. We offer excellent working conditions and vacation/time off benefits. No health benefits at this time.

To be considered for this position, Please send your resume along with cover letter via email in form of attachment to the craigslist link.

Selected candidate must successfully pass a background check and a drug test as a condition for employment.

EOE

Read more from the original source:
Packing/Production Associate (Marietta/Kennesaw/Woodstock)

Applicants must have a winning attitude, attention to detail and be willing to put forth extra effort while working in a fast paced environment.

Duties to include but not limited to:

Ø Customer Service

Ø Proper procedures is followed in task being performed

Ø Deliveries / Picking up product when necessary

Ø Truck Maintenance (Daily inspections, Clean Truck, ext)

Ø Paperwork (Done daily, Invoices are properly billed and legible)

Ø Complete daily logs

Ø Stage finished product for loading

Ø Load/unload Finished/Raw product into truck

Ø Move raw materials to warehouse storage

Ø Responsible for quality control (no damage product is sent out or accepted in)

Ø Clean and Maintain work area.

Ø Ability to lift up to 60 lbs

Ø Other duties as assigned.

Read the original here:
CDL B Driver/Warehouse: (Tucker)

We currently have an opening for Full Time Maintenance Technician / Machine Operator with proven track record. Duties and Responsibilities:

• Maintaining, trouble shooting and servicing mechanical & electrical food processing equipment with plc and relay logic controllers.

• Read mechanical, hydraulic, pneumatic, and electrical schematics.

• Daily assembly and setup of equipment for the day’s production

• Daily disassembly of equipment to be cleaned

• Document machine settings once the machine is setup properly

• Organize the daily maintenance tasks and machine operation tasks

• Plan regular and preventive maintenance

• Keep inventory of spare parts and tools

• Perform general plant and office maintenance tasks

• Maintain refrigeration equipment

• Help in warehouse department if required

Requirements:

To perform this job successfully, an individual must be able to complete all areas outlined for this position in a satisfactory manner. Listed below are representative of the knowledge, skills, and/or abilities necessary to meet the minimum job requirements:

• High School Diploma, GED, Technical or Trade school.

• Have three to five (3-5) years’ minimum experience working in the machine repair field and/or facilities maintenance department preferably in a food processing plant.

• The employee must have the ability to troubleshoot and repair electro-mechanical assemblies, electric motors and simple control wiring.

• Experience with refrigeration systems a plus.

• Must be able to comprehend equipment manuals, manufacturer’s specifications, diagrams, and sketches.

• Experience with forklifts, conveyors, CNC Machines is helpful

Skill and Knowledge:

• Must be able to manage time and set priorities.

• Must be organized and detail oriented.

• The employee must be able to perform his/her job in a professional manner.

• Must be able to communicate and work well with superiors, co-workers, suppliers and others associated with the company’s business.

• The employee must be familiar with lockout tagout procedures as required by OSHA.

Other:

• Need Reliable Transportation.

• Need Excellent Organization skills and Reporting Abilities.

• Professional appearance, demeanor, and flexibility a must.

Read more from the original source:
Full Time Maintenance Technician / Machine Operator (Tucker )

******Statham is over an hour north of Atlanta and 30-45 minutes north of the northern end of Lawrenceville. This is in close proximity to Athens and Winder.******

Read more here:
Slip Sheet Forklift Operators (Staham, GA)

Must have Quality Assurance experience in a Distribution or Warehousing environment.

Rate of pay-$10-$12.50

Hours – 8am – 5pm.

Long term contract position.

Drug Free Workplace.

Please email resumes to: jeffj@staffrightus.com

CODE: QA

Read more here:
Quality Assurance (Lawrenceville)

The ideal candidate will have:

• Ability to read blueprints

• Extensive knowledge and experience with SolidWorks.

• Extensive knowledge, understanding and experience in a metal fabrication and machining environment.

• The ability to deal efficiently with deadlines and create several estimates simultaneously.

• Effective communication skills providing accurate information to both co-workers and customers.

• Basic Mircrosoft office; Word, Excel

This position requires but is not limited to:

• Development of drawings, bills of materials and routers for new projects

• Estimating cost (labor, material and outside processes) of manufacturing and machining for RFQ’s.

Engineering degree is not required but considered a plus. Experience in Six Sigma, Lean Manufacturing and/or Kaizen is also desirable. It goes without saying that a strong work ethic, team attitude and dependability are required

Read more here:
Engineer/Estimator (Cherokee County)

Drug Screen and Criminal Background required

Bilingual (English/Spanish) a PLUS

Please submit a resume OR if no resume is available, please provide us with your name and telephone number for us to contact you.

Read the original here:
Pickers & Packers (Duluth, GA)

8+ Years Food Manufacturing experience

2+ years experience as shift manager

Lean Manufacturing experience

QA knowledge

Shipping & Receiving

Leadership development

Cost reduction projects

Six Sigma

Maintenance experience – Baggers, scales, metal detector

Interested applicants must submit a resume for consideration

Read more from the original source:
Shift Manager – Food Manufacturing (College Park, GA)

5+ years Food Manufacturing supervisory experience

Lean Manufacturing experience

QA knowledge

Shipping & Receiving

Leadership development

Cost reduction projects

Six Sigma

Maintenance experience – Baggers, scales, metal detector

Shift Flexibility is a big plus

Must understand that it will be long hours and weekends during the busy holiday season.

Applicants must submit a resume for consideration.

Read more from the original source:
Production Manager – Food Manufacturing (College Park, GA)

This person will be a “jack of all trades”. The main responsibility will be working in our production line operating semi-automated equipment, packing, labeling, replenishing raw material, preparing/cleaning production line, etc. The secondary responsibility in a lesser capacity will be performing quality inspections of incoming deliveries and finished products.

Ideally, this person will have experience in an assembly/production environment.

RESPONSIBILITIES:

• Operate semi-automated packaging line and its components

• Perform manual labor during production such as packing, labeling, material replenishing, etc.

• Assist with cleaning of equipment and production facilities

• Perform and report quality inspections of incoming deliveries and finished products

• Assist front office with miscellaneous projects during slow production periods

• Perform other duties as assigned

REQUIREMENTS:

• High school education or equivalent

• Computer literate

• Ability to Ability to lift 40+ lbs

• Experience working in a warehouse or production environment

• Ability to work standing for extended periods of time

• Ability to read, understand and follow manufacturing/inspection process instructions

• Applicants must be of legal age and able to provide proof of employment eligibility

WE OFFER:

This position pays $10 an hour. We offer excellent working conditions and vacation/time off benefits. No health benefits at this time.

To be considered for this position, Please send your resume along with cover letter via email in form of attachment to the craigslist link.

Selected candidate must successfully pass a background check and a drug test as a condition for employment.

EOE

Read more from the original source:
Production Associate/ Quality Control Inspector (Marietta/Kennesaw/Woodstock)

CNC PRESS BRAKE OPERATORS —- Must have 3-4 years experience on CNC controlled Press brakes. Must have tooling knowledge and be able read blue prints. Must have tools. Please send resume as well as the type of machinery and CNC controls that you have used.

Welders— Must have 3-4 years fabrication experience. MIG and TIG welding a must. Should be able to read blue prints. We do not stick weld. Please list equipment used in your resume. We only do in house work so no travel is required.

Pay is based upon experience and qualifications. Immediate positions needing to be filled. Do not contact me if you are a recruiter or Spammer.

This is a Drug free work.

Read the original here:
Fabricators wanted/Welders/Pressbrake Operators (McDonough)

Resposibilities include

.Remanufacture laser cartridges on a daily basis

Provide assistance to customers regarding technical issues

Use Point of Sale to enter customer information,quantity,description and pricing information

Facilitate ordering process when quantities treach re-order point

Maintain a clean and orderly technical area

Requiremnts :

Demonstrated customer service skills

PrevIous expirience in printer or cartridge technology desired but not required

Maintain equipment according to store standarts

Strong mechanical aptitude

ability to work at least one Saturday shift per week

Ability to work with multiple projects and deadlinies

Ability to lift 50 pounds without assistance

Read the original here:
Store laser/ink Technician (Dunwoody/Sandy Springs)

Prefer position requirements are as follows:

• Working knowledge of Industrial Washing systems and Ironers to include Braun 450’s, Challenge Dryers, Hi Pro 6 Roll Ironer, and various other machinery.

• Performs routine and specialized maintenance of facility and equipment with little or no supervision.

• Perform all tasks in a safe manner by following all OSHA / State / Federal /Company regulations and policies.

• Ability to develop and document preventive maintenance procedures as per company policy.

• Train production employees on basic maintenance procedures for all equipment

• Ability to work nights and weekends

• Perform all work in accordance with all state/federal/company regulations

• Perform other task as needed by management

• Maintain tool/parts room

Qualified candidates should send resumes to jdillon@southeastlinen.com or call 678-546-6343 and ask for Jim Dillon

· Location: Suwanee, GA

· Principals only. Recruiters, please don’t contact this job poster.

· Please do not contact job poster about other services, products or commercial interests

Read the original here:
Maintenance Engineer

Qualified Candidates only, please apply within at 897 Adamson Street, Atlanta, Ga or send resumes to pdardy@schn.com

Read more here:
Heavy Equipment Mechanic (North GA)

Read more here:
Help wanted for wholesale picture frames (cumming)

1yr. RF Scanner exp required: 2yrs. warehouse exp. needed

Flexibility to work EITHER 1st shift: Monday-Friday 7am-4pm OR 3rd shift: Sunday-Thursday 8pm-4:30am

Temp to Perm

$10/hr.

e-mail resume or fax resume to (770) 822-0785

Read the original here:
Forklift Operators (Braselton)

You will be responsible for maintaining and improving process performance in assembly, test and assembly areas. Develops performance standards, establish the departmental engineering and documentation standards, identifies the customer needs (internal or external) and contract requirements. Develops project cost estimates, projected schedules, and resource requirements, and manages them throughout the project. Works with the Engineering Leadership to assist the development of engineering, product and platform design and performance parameters, technical documentation, and subcontractor specifications.

Requirements: Bachelor’s degree in Engineering (BSIE or BSME) and 2-5 years experience in a large engineering environment. An MBA would be a plus. Six Sigma Black Belt or Green Belt certification is a plus. Knowledge of manufacturing & distribution capabilities, process improvements focus, work station layout, project costing methods, assembly procedures, bill of material structure, and computer skills required, including proficiency with Microsoft Project. Knowledge of Lean manufacturing and experience applying Demand Flow is a plus.

This is for an industry leader that defines the term ” Blue-Chip” organization. This company puts a high value on quality of life, skill & career growth, and has an opportunity for vertical career-tracks. This position has an strong compensation package ( base salary range of $50-75k + Bonus) , tremendous benefit and retirement programs. Relocation assistance available. Please email your resume to jmknose@corpimg.com.

Read the original here:
Industrial Engineer (Engineering Development Program) (Atlanta, GA)

Must have hands-on experience in:

Digital circuit design and testing:

74XX series digital logic

4000 series CMOS

Micro controller circuit design with PIC / ATMEL / Winbond and other

Analog Design

NPN, PNP and FET and other discrete circuits

Component behaviour (temperature and failure modes)

Audio and RF to 200Mhz

PCB design

Eagle PCB single, 2 side and multi layer for consumer products

Prototyping

Engineer must be able to layout and neatly solder circuits in development.

Engineer must show excellent technician skills and use of tools

Engineer must be able to correctly identify many components and the function

Engineer must show example / sample product at interview and explain the circuit operation in detail.

Engineer must demonstrate use of VOM and DVM, Power Supply, Signal Generator, and Oscilloscope

Read the original here:
Sr. Electrical Engineer (N. Alpharetta)

JOB DESCRIPTION:

Shipping, receiving, warehouse, Quality Control

REQUIREMENTS:

• Forklift driver

• Good attendance

• Able to work all shifts (12h. night shift)

• Strong work ethic

SALARY AND BENEFITS:

Medical and dental insurance

3 weeks paid holidays and vacation

Salary commensurate with experience

COMPANY OVERVIEW:

Armal, Inc. (a subsidiary of Armal, Italy), located in Griffin, GA is an International Organization that manufactures portable toilets. Founded in the early 80’s, we’ve grown into an industry leader. We are currently looking for dedicated people to share in our success. Please visit our website www.armal.biz for more information on our company.

Read more here:
Shipping / Receiving (Griffin)

Quality Assurance

Inventory

Cycle Counter.

Maintenance

Forklift Operator

Pay $9.00-11.00 an hour. 1st and 2nd shift openings. Must be able to pass a criminal background check and drug screen.

Read more here:
Open Positions! (Calhoun GA)

• Operate all SMT equipment in the Georgia facility, including a screen printer, pick and place machines, re-flow oven, etc.

• Program the SMT equipment for new assemblies

• Edit the existing programs for existing assemblies

• Perform basic maintenance activities as described in the maintenance program

• Make entries in the machine logs after a corrective or preventive maintenance event

• Move the required SMT components into Inovision from stock-to-machine (WIP) locations

• Return the leftover SMT parts, indicating the new quantity of tube and loose parts

• Take instructions from the Team Leader

• Accept constructive feedback from Quality Assurance

• Perform occasional inventory counts

• Keep an organized workstation, clearly identifying the inputs and outputs of the process, including identification of non-conforming materials

Qualified candidates should send resumes to jesseblanner@personnelconcerns.com. EOE

Read more here:
SMT Operator/Programmer (Suwanee, GA)

Read more from the original source:
Assembly/Warehouse/Shipping Coordinator (Norcross, GA)

Job summary

Under limited supervision; responsible for the daily administration and operation of the warehouse–includes: stockroom, shipping, and receiving. Through subordinate staff, oversees multiple areas including distribution functions such as shipping, receiving, and stock control.

Summary of essential job functions

• Organization of warehouse

• Staffing and assignment of duties to subordinate personnel

• Generate pick lists

• Maintain and conduct required cycle counts

• Maintain records of all inventory movement

Other duties and responsibilities

• Reviews effectiveness of operating procedures, maintenance, space utilization, and protection of equipment

• Perform other duties as assigned

Minimum requirements

• High School Diploma or equivalent GED. (College degree a plus)

• 7 years or more experience in electronics manufacturing environment with 5 years being in a materials supervisor role.

Abilities required

• Be able to perform light physical activity performing non-strenuous daily activities of a productive/technical nature

• Manual dexterity sufficient to reach/handle items, works with the fingers, and perceive attributes of objects and materials

Work schedule

• 7:00am – 3:30pm Monday through Friday

• Weekend and overtime work may be required

Read more from the original source:
Materials Manager needed

Read the original here:
Mechanical Tech-Part Time (Fulton Industrial Area)

To be considered for this position, you must have:

5 years experience Supervising 12 or more Skilled Craftsmen

Cabinetmaking experience in a Shop Environment

Strong Communication and Leadership Skills

Familiarity with AWI Standards

Operational and Programming knowledge of all relevant Machinery

Ability to read plans

Experience in finishing

Stable Career History

Leadership history in running a team

Good References

Please email your resume to: employment@jadegroupinc.com

Read the original here:
Millwork shop foreman (Duluth)

Read more from the original source:
Wood Finisher (Midtown)

Core Responsibilities:

Support the Warehouse Manager with all tasks in the warehouse including:

- Helping manage up to 8 warehouse associates

- Assisting other managers in different departments with questions and/or problems associated with the warehouse

- Acting as a leader in the warehouse and delegating duties

- Assisting with shipping/receiving, inventory counts, and all other tasks in the warehouse

Requirements:

-Must have 3+ years of management experience in a warehouse and or production environment

-Must have experience operating a sit down and stand up forklift

-Must be able to pass a criminal background check

-Must be able to pass a CREDIT check

-Must be able to pass a drug screen

If you meet these qualifications please apply and someone will be in contact with you.

Read the original here:
Warehouse Assistant Manager (Atlanta)

Excellent benefits package including medical/dental/optical, plus 401(k). Stable, smoke-free environment. Competitive wages based on experience.

SMOKE FREE DRUG FREE EEOC

Read more from the original source:
Machine Shop Lathe Operator (Woodstock, GA)

Email resume or fax 770-419-3304

Read more from the original source:
Assembler for Canton, GA (Canton, GA)

Read the original here:
Printing Experience Required (Buckhead)

Read the original here:
Sign Sales & Project Management (Norcross, GA)